Opis produktu Główne zastosowanie
Pieps Pro BT to lawinowy transceiver przeznaczony do szybkiego odnajdywania osób zasypanych śniegiem podczas wypraw w góry.
Kluczowe funkcje
Dzięki trzem antenom urządzenie zapewnia precyzyjne określanie kierunku i głębokości sygnału, a szerokość przeszukiwania 60 m pozwala na skuteczne skanowanie dużego obszaru. Funkcja oznaczania (marking) umożliwia wyłączanie już zlokalizowanych nadajników, co usprawnia dalsze poszukiwania. Łączność Bluetooth i dedykowana aplikacja mobilna oferują dodatkowe narzędzia do monitorowania parametrów, a wibracja dostarcza dyskretnego sygnału zwrotnego nawet przy ograniczonej widoczności.
Kliknij, aby przeczytać opis produktu od Pieps Pieps opisuje Pro BT
EXTENSIVE SELF-CHECK: Review of all relevant hardware and software elements as well as showing the current software version.
PERFECTLY READABLE DISPLAY: in all lighting conditions.
VIBRATION: at initial signal detection. This lets rescuers focus on the visual surface search during the signal search. PERFECT MARK-PERFORMANCE: due to exact signal processing without any performance losses.
PIEPS INTERFERENCE PROTECTION: The influence of external interferences is eliminated or reduced to a minimum:
Protection in send mode with Auto-Antenna-Switch: If the transmitting antenna is impacted by external interference, the other antenna would take over the transmit function.
Protection in search mode with Signal Verification: Only a verified 457kHz signal is indicated.
iPROBE SUPPORT: The PIEPS PRO BT can be temporarily deactivated using the smart iPROBE. The receiving beacon automatically receives the next strongest signal.
BACKUP-MODE: The PIEPS PRO BT is in send mode but the send signal is temporarily suppressed. So rescuers aren’t disturbed during the search.
AUTO-SEARCH-TO-SEND: This function automatically switches the PIEPS PRO BT from search mode to send mode, if the beacon is not moving for a certain time (in case of burial).
GROUP CHECK: Reviews the activity and transmission parameters of the partner device. PIEPS recommends to perform a group check before each tour.
SCAN-FUNCTION: The SCAN-function will give you an overview of all buried devices within the detectable range.
VICTIM SELECTION: The PIEPS PRO BT scans the entire receiving range. The closest 3 victims are indicated.
ANALOG-MODE: The analog mode can be used for specific search strategies as well as for demo reasons.
TX600-SUPPORT: The PIEPS TX600 is a mini-transmitter for dogs and equipment that is transmitting out of the standard EN300718 and can be received with every PIEPS PRO BT.
INCLINOMETER: With the integrated three dimensional inclinometer the the punctual angle of the slope can be measured.
CARRYING SYSTEM PIEPS PRO BT: High wearing comfort at low weight, Neoprene pouch with soft shoulder strap, Quick-Pull-System for fast access to the device
SECURE SLIDER SWITCH MECHANISM: The switching from one position to another (OFF-SEND-SEARCH) is only possible with a secure 2-hand-activity. The two operating elements lock button (1) and slider (2) have to be forced at the same time and in different directions – only then a switching of the positions is possible.
Product specificaties
| Antennas | 3 |
|---|---|
| Funkcja znakowania | Tak |
| Remarkable | Bluetooth, mobile app, vibration |
| Szerokość paska wyszukiwania | 60 m (197 ft) |
Product video
